CP-761 is an acrylic polymer emulsion that offers an alternative method to the Novabond slurry method of surfacing bare concrete. When used over clean concrete, CP-761 will improve bond of acrylic coatings to concrete.
Allow CP-761 to dry completely before next application of Novacrylic surface system.
NEW CONCRETE MUST:
Have vapor barrier under the slab
Have medium broom finish
Contain no curing agents
Cured for 30 days
Be etched with phosphoric acid wash
Be prepared as instructed on “Preparation Concrete” page
DILUTION
2 parts CP-761 and 1 part water
SPREADING RATE
0.05 - .057 gallons per sq. yd., per coat, 160 - 180 sq. ft. per gallon, per coat
COLOR
Milky white liquid / clear when dry
PACKAGED QUANTITY
5 gallon pail, 30 gallon drum, 55 gallon drum
WEIGHT
8.7 lbs per gallon
Minimum Application Temperature is 50°F and rising.
Application is with either roller, Neoprene rubber squeegee, or spray
CP-761 is not hazardous* and is free of lead, mercury, asbestos and formaldehyde.
* According to standards in place at the time this document was created, this product is rated non-hazardous
