Preparation & Repair Tennis Surfaces Multi-Sport Surfaces Track Lines & Markings

NOVASURFACE

NOVASURFACE is 100% acrylic concentrate to be blended with sand and water at the jobsite. It is used as a resurfacer for pavement prior to the application of acrylic color surfacing systems. The sand filled mixture is squeegeed over the surface to fill voids and hide the profile of aggregates in the pavement. The use of Novasurface over an open or porous asphalt mix will seal the pavement, make it smoother and increase the yield of subsequent Novacrylic color materials.

Novasurface may be applied over uncoated concrete only after priming with CP-761 Concrete Primer.

Unlike asphalt emulsion resurfacers, Novasurface does not deteriorate with age. It is resistant to water and does not have to be rolled after application. Another advantage is the easy wash up and cleaning of tools with water.

DILUTION: Resurfacer	2 parts Novasurface to 1 part water - Add 10 - 15 lb sand (50-60 mesh) per gallon of Novasurface
SPREADING RATE	0.06 - 0.10 gallons per sq. yd., per coat // 90 - 150 sq. ft. per gallon, per coat
CRACK FILLER	Add sand to undiluted Novasurface until consistency of putty
COLOR	Dark grey
PACKAGED QUANTITY	5 gallon pail, 30 gallon drum, 55 gallon drum
WEIGHT	9.5 lbs per gallon
Minimum Application Temperature is 50°F and rising. Application is with a neoprene rubber squeegee. NOVASURFACE is not hazardous* and is free of lead, mercury, asbestos and formaldehyde.

* According to standards in place at the time this document was created, this product is rated non-hazardous